[Top] | [Previous] | [Next]

### B-7.2 GSS Performance Analysis

The GSS Extract processing load is described by the following equation, which is similar in structure to that described for Sync/Extract Telemetry in section B6.1:

Nominal LGE = ((G/10 words/sec) * (15 instr/word)) / (1.83 SPECint92/MIPS * 106)

where: LGE = GSS Extract load (SPECint92)

G = GSS status rate (bps)

words = GSS status words

The total GSS Conversion load is described by the following equation:

Nominal LGC = ((G/10 words/sec) * (48 instr/word)) / (1.83 SPECint92/MIPS) * 106

where: LGC = GSS Convert load (SPECint92)

G = GSS status rate (bps)

The GSS Monitor load is described by the following equation:

Nominal LGM = ((G*(0.05)/10 words/sec) / 3 words/rule) / (270 rules/sec/SPECint92)

where: LGM = GSS Monitor load (SPECint92)

G = GSS status rate (bps)

The GSS Display load is described by the following equation:

Nominal LGD = D * ((G*(0.01)/10 words/sec) / (250 meas/sec/SPECint92)

Table B-5 presents process loads for various GSS rates.

Table B-5. Summary GSS Process Loads

 Nominal Load (SPECint92) G (bps) LGE LGC LGM LGD 1200 0.00098 0.00315 0.00741 0.00480 1912 0.00157 0.00502 0.01180 0.00765 2864 0.00235 0.00751 0.01768 0.01146 3112 0.00255 0.00816 0.01921 0.01245 6816 0.00559 0.01788 0.04207 0.02726

Figure B-12 illustrates the loading allocation for the highest data rate case (G = 6816 bps) listed in Table B-5. This case represents a worst-case GSS load, since the GSS Extract and Convert functions would not be accomplished on the 1200 bps local status data stream. 